Welcome to Journal of Beijing Institute of Technology
Advance Search
Volume 27Issue 4
.
Turn off MathJax
Article Contents
Article Navigation> JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY> 2018> 27(4): 535-546
Guoliang Hu, Jiawei Zhang, Mingke Liao, Ruqi Ding. Effect of Radial Resistance Gap on the Pressure Drop of a Compact Annular-Radial-Orifice Flow Magnetorheological Valve[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2018, 27(4): 535-546. doi: 10.15918/j.jbit1004-0579.17125
Citation: Guoliang Hu, Jiawei Zhang, Mingke Liao, Ruqi Ding. Effect of Radial Resistance Gap on the Pressure Drop of a Compact Annular-Radial-Orifice Flow Magnetorheological Valve[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2018, 27(4): 535-546.doi:10.15918/j.jbit1004-0579.17125
shu

Effect of Radial Resistance Gap on the Pressure Drop of a Compact Annular-Radial-Orifice Flow Magnetorheological Valve

doi:10.15918/j.jbit1004-0579.17125

  • Key Laboratory of Conveyance and Equipment, Ministry of Education, East China Jiaotong University, Nanchang 330013, China

  • Received Date:2017-11-13
    Abstract
  • A compact annular-radial-orifice flow magnetorheological (MR) valve was developed to investigate the effects of radial resistance gap on pressure drop. The fluid flow paths of this proposed MR valve consist of a single annular flow channel, a single radial flow channel and an orifice flow channel through structure design. The finite element modelling and simulation analysis of the MR valve was carried out using ANSYS/Emag software to investigate the changes of the magnetic flux density and yield stress along the fluid flow paths under the four different radial resistance gaps. Moreover, the experimental tests were also conducted to evaluate the pressure drop, showing that the proposed MR valve has significantly improved its pressure drop at 0.5 mm width of the radial resistance gap when the annular resistance gap is fixed at 1 mm.
    • FullText(HTML)
  • loading
    • References (16)
  • [1]
    Carlson J D. Properties and applications of commercial magnetorheological fluids[J]. Journal of Intelligent Material Systems and Structures, 1999, 10(1):5-13.
    [2]
    Kostamo E, Kostamo J, Kajaste J, et al. Magnetorheological valve in servo applications[J]. Journal of Intelligent Material Systems and Structures, 2012, 23:1001-1010.
    [3]
    Abd Fatah A Y, Mazlan S A, Koga T, et al. A review of design and modeling of magnetorheological valve[J]. International Journal of Modern Physics B, 2015, 29(4):1308-316.
    [4]
    Hu G, Long M, Yu L, et al. Design and performance evaluation of a novel magnetorheological valve with a tunable resistance gap[J]. Smart Materials and Structures, 2014, 23(12):127001.
    [5]
    Gorodkin S, Lukianovich A, Kordonski W. Magnetorheological throttle valve in passive damping systems[J]. Journal of Intelligent Material Systems and Structures, 1998, 9(8):637-641.
    [6]
    Grunwald A, Olabi A G. Design of magneto-rheological (MR) valve[J]. Sensors and Actuators A:Physical, 2008, 148(1):211-223.
    [7]
    Salloom M Y, Samad Z. Design and modeling magnetorheological directional control valve[J]. Journal of Intelligent Material Systems and Structures, 2012, 23(23):155-167.
    [8]
    Yoo J H, Wereley N M. Design of a high-efficiency magnetorheological valve[J]. Journal of Intelligent Material Systems and Structures, 2002, 13(10):679-685.
    [9]
    Aydar G, Wang X, Gordaninejad F. A novel two-way-controllable magneto-rheological fluid damper[J]. Smart Materials and Structures, 2010, 19(6):065024.
    [10]
    Liao C R, Zhao D X, Xie L, et al. A design methodology for a magnetorheological fluid damper based on a multi-stage radial flow mode[J]. Smart Materials and Structures, 2012, 21(8):085005.
    [11]
    Hu Guoliang, Li Haiyan, Li Weihua. Comparison and experiment of pressure drop of radial and annular type magnetorheological valves[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(4):364-371, 405. (in Chinese)
    [12]
    Ai H X, Wang D H, Liao W H. Design and modeling of a magnetorheological valve with both annular and radial flow paths[J]. Journal of Intelligent Material Systems and Structures, 2006, 17(4):327-334.
    [13]
    Wang D H, Ai H X, Liao W H. A magnetorheological valve with both annular and radial fluid flow resistance gaps[J]. Smart Materials and Structures, 2009, 18(11):115001.
    [14]
    Imaduddin F, Mazlan S A, Rahman M A A, et al. A high performance magnetorheological valve with a meandering flow path[J]. Smart Materials and Structures, 2014, 23(6):065017.
    [15]
    Imaduddin F, Mazlan S A, Zamzuri H, et al. Design and performance analysis of a compact magnetorheological valve with multiple annular and radial gaps[J]. Journal of Intelligent Material Systems and Structures, 2015, 26(9):1038-1049.
    [16]
    Imaduddin F, Mazlan S A, Zamzuri H, et al. Testing and parametric modeling of magnetorheological valve with meandering flow path[J]. Nonlinear Dynamics, 2016, 85(1):287-303.
    • Relative Articles
  • Supplements (0)
  • Cited By
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (651) PDF downloads(462) Cited by()
    Proportional views
    Related

    Address:5 Zhongguancun South Street, Haidian District, Beijing

    Tel:86-10-68914374

    Email:blgywb@bit.edu.cn

    Copy Right © Journal of Beijing Institute of Technology

    Supported by:Beijing Renhe Information Technology Co. Ltd

    /

      Return
      Return
        Baidu
        map