Welcome to Journal of Beijing Institute of Technology
Advance Search
Volume 26Issue 4
.
Turn off MathJax
Article Contents
Article Navigation> JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY> 2017> 26(4): 458-467
Guoliang Hu, Fang Zhong, Haiyun Zhang, Ruqi Ding. Structure Optimization and Performance Analysis of a Multiple Radial Magnetorheological Valve[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2017, 26(4): 458-467. doi: 10.15918/j.jbit1004-0579.201726.0405
Citation: Guoliang Hu, Fang Zhong, Haiyun Zhang, Ruqi Ding. Structure Optimization and Performance Analysis of a Multiple Radial Magnetorheological Valve[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2017, 26(4): 458-467.doi:10.15918/j.jbit1004-0579.201726.0405
shu

Structure Optimization and Performance Analysis of a Multiple Radial Magnetorheological Valve

doi:10.15918/j.jbit1004-0579.201726.0405

  • Key Laboratory of Conveyance and Equipment, Ministry of Education, East China Jiaotong University, Nanchang 330013, China

  • Received Date:2017-01-26
    Abstract
  • Due to the controllable and reversible properties of the smart magnetorheological (MR) fluid, a novel multiple radial MR valve was developed. The fluid flow channels of the proposed MR valve were mainly composed of two annular fluid flow channels, four radial fluid flow channels and three centric pipe fluid flow channels. The working principle of the multiple radial MR valve was introduced in detail, and the structure optimization design was carried out using ANSYS software to obtain the optimal structure parameters. Moreover, the optimized MR valve was compared with pre-optimized MR valve in terms of their magnetic flux density of radial fluid resistance gap and performance of pressure drop. The experimental test rig was set up to investigate the performance of pressure drop of the proposed MR valve under different currents applied and different loading cases. The results show that the pressure drop between the inlet and outlet port could reach 5.77 MPa at the applied current of 0.8 A. Furthermore, the experimental results also indicate that the loading cases had no effect on the performance of pressure drop.
    • FullText(HTML)
  • loading
    • References (15)
  • [1]
    Abd Fatah A Y, Mazlan S A, Koga T, et al. Design of magnetorheological valve using serpentine flux path method[J]. International Journal of Applied Electromagnetics and Mechanics, 2016, 50(1):29-44.
    [2]
    Nguyen Q H, Han Y M, Choi S B, et al. Geometry optimization of MR valves constrained in a specific volume using the finite element method[J].Smart Materials and Structures, 2007, 16(6):2242-2252.
    [3]
    Nguyen Q H, Choi S B, Wereley N M. Optimal design of magnetorheological valves via a finite element method considering control energy and a time constant[J]. Smart Materials and Structures, 2008, 17(2):1-12.
    [4]
    Nguyen Q H, Choi S B, Lee Y S, et al. An analytical method for optimal design of MR valve structures[J]. Smart Materials and Structures, 2009, 18(9):1088-1100.
    [5]
    Ichwan B, Mazlan S A, Imaduddin F, et al. Development of a modular MR valve using meandering flow path structure[J]. Smart Materials and Structures, 2016, 25(3):037001.
    [6]
    Imaduddin F, Mazlan S A, Zamzuri H, et al. Design and performance analysis of a compact magnetorheological valve with multiple annular and radial gaps[J]. Journal of Intelligent Material Systems and Structures, 2015, 26(9):1038-1049.
    [7]
    Imaduddin F, Mazlan S A, Rahman M A A, et al. A high performance magnetorheological valve with a meandering flow path[J]. Smart Materials and Structures, 2014, 23(6):065017.
    [8]
    Imaduddin F, Mazlan S A, Zamzuri H, et al. Testing and parametric modeling of magnetorheological valve with meandering flow path[J]. Nonlinear Dynamics, 2016, 85(1):287-303.
    [9]
    Wang D H, Ai H X. A high efficient magnetorheological valve and its testing[J]. Journal of Functional Materials, 2006, 37(7):1179-1182. (in Chinese)
    [10]
    Wang D H, Ai H X, Liao W H. A magnetorheological valve with both annular and radial fluid flow resistance gaps[J]. Smart Materials and Structures, 2009, 18(11):115001.
    [11]
    Hu Guoliang, Li Haiyan, Zhang Haiyun. Performance analysis and experimental tests of pressure drop of annular type magnetorheological valve[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(3):381-388. (in Chinese)
    [12]
    Hu Guoliang, Li Haiyan, Li Weihua. Comparison and experiment of pressure drop of radial and annular type magnetorheological valves[J]. Transactions of the Chinese Society for Agricultural Machinery, 2016, 47(4):364-371, 405. (in Chinese)
    [13]
    Yang L K, Duan F B, Eriksson A. Analysis of the optimal design strategy of a magnetorheological smart structure[J]. Smart Materials and Structures, 2008, 17(1):015047.
    [14]
    Hadadian A, Sedaghati R, Esmailzadeh E. Design optimization of magnetorheological fluid valves using response surface method[J]. Journal of Intelligent Material Systems and Structures, 2013, 25(25):1352-1371.
    [15]
    Salloom M Y, Samad Z. Finite element modeling and simulation of proposed design magneto-rheological valve[J]. The International Journal of Advanced Manufacturing Technology, 2011, 54(5-8):421-429.
    • Relative Articles
  • Supplements (0)
  • Cited By
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (734) PDF downloads(560) Cited by()
    Proportional views
    Related

    Address:5 Zhongguancun South Street, Haidian District, Beijing

    Tel:86-10-68914374

    Email:blgywb@bit.edu.cn

    Copy Right © Journal of Beijing Institute of Technology

    Supported by:Beijing Renhe Information Technology Co. Ltd

    /

      Return
      Return
        Baidu
        map