Citation: | ZHAO Yan, ZENG Qing-xuan, FENG Chang-gen. Theoretical Model for Calculating Electric-Power Curves Depicting Accelerated Flyer by Exploding Foil[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2010, 19(1): 8-13. |
[1] |
Sweat W C, Crump O B, Brigham W P. Optimization of a VISAR for measuring flyer-plate velocities //SPIE Ultrahigh- and High-Speed Photography, Videography, and Photonics. San Diego, CA, USA: , 1993, 1757:82-88.
|
[2] |
Deng Xiangyang, Peng Qixian, Zhao Jianheng, et al. Experimental studies on velocity measurement of mylar flyer driven by exploding metal foils with VISAR[J]. Chinese Journal of Explosives and Propellants, 2007, 30(3): 45-48. (in Chinese)
|
[3] |
Li Tao, Weng Jidong, Wang Zhiping, et al. Velocity measurement of electrically driven flyers[J]. High Energy Density Physics, 2007, 6(2):51-61. (in Chinese)
|
[4] |
Wang Guiji, Deng Xiangyang, Tan Fuli, et al. Velocity measurement of the small size flyer of an exploding foil initiator[J]. Explosion and Shock Waves, 2008, 28(1): 28-32. (in Chinese)
|
[5] |
Tucker T J, Stanton P L. Electrical gurney energy: a new concept in modeling of energy transfer from electrically exploded conductors, SAND-75-0244 . Albuquerque, USA:Sandia Labs, 1975.
|
[6] |
Stanton P L. Acceleration of flyer plates by electrically exploded foils, SAND-75-0221 . Albuquerque, USA: Sandia Labs, 1976.
|
[7] |
Osher J, Gthers G, Chau H, et al. Hypervelocity acceleration and impact experiments with the LLNL electric guns[J]. International Journal of Impact Engineering, 1990,10 (1-4):439-452.
|
[8] |
Lindemuth I R, Brownell J H, Greene A E, et al. A computational model of exploding metallic fuses for multimegajoule switching[J]. Journal of Applied Physics, 1985, 57(9):4447-4460.
|
[9] |
Lee R S, Osher J E, Chau H H, et al. 1MJ electric gun facility at LLNL[J]. IEEE Transactions on Magnetics, 1993, 29(1):457-460.
|
[10] |
Geng Chunyu. Velocity analysis of a plastic flyer accelerated by electrically exploded metal foil[J]. Energetic Materials, 1995, 3(2): 37-42. (in Chinese)
|
[11] |
Liang Longhe, Fan Zhongbo, Hu Xiaomian. Research on a flyer accelerated by electrically exploded metal foil by means of numerical simulation[J]. Acta Armamentarii, 1999, 20(2): 102-107. (in Chinese)
|
[12] |
Hu Xiaomian, Feng Changgen, Zeng Qingxuan, et al. Dynamic model of accelerating flyer with electric exploding foil[J]. Initiators and Pyrotechnics, 2003, 3(1): 41-44. (in Chinese)
|
[13] |
Hu Xiaomian. The optimizing design, simulation calculation and safety of exploding foil initiation system . Beijing: Beijing Institute of Technology, 1998. (in Chinese)
|
[14] |
Zhao Yan, Zeng Qingxuan, Liang Qi. Study of theoretical model for electric exploding foil conductivity[J]. Acta Armamentarii, 2008, 29(8): 902-906. (in Chinese)
|
[15] |
Logan J D, Lee R S. A computer simulation of the preburst behavior of electrically heated exploding foils, UCRL-52003 . Livermore, USA: Lawrence Livermore Lab,1976.
|
[16] |
Schmidt S C, Seitz W L, Wackerle J. Empirical model to compute the velocity histories of flyers driven by electrically exploding foils, LA-6809 . Los Alamos, USA: Los Alamos Scientific Lab,1977.
|
[17] |
Cutting J L, Lee R S, Hodgin R L. Quantic Industries Inc. Slapper Detonator Performance, UCRL-ID-117787 . Livermore, USA:Lawrence Livermore National Lab, 1994.
|
[18] |
Chu Enyi, Ren Xi, Qian Yong, et al. Study on the design parameters of exploding foil initiation[J]. Initiators & Pyrotechnics, 2008, 6(3):26-27,47. (in Chinese) (Edited by
|