Citation: | Chongbo Jing, Junjie Zhou, Jichen Zhou. Experimental Study of Churning Losses in Swash Plate Axial Piston Pump[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2019, 28(3): 529-535.doi:10.15918/j.jbit1004-0579.18029 |
[1] |
Yang Huayong, Pan Min. Engineering research in fluid power:A review[J]. Journal of Zhejiang University SCIENCE A, 2015, 16:427-442.
|
[2] |
Thiagarajan D,Vacca A. Mixed lubrication effects in the lateral lubricating interfaces of external gear machines:Modelling and experimental validation[J]. Energies, 2017, 10(1):111.
|
[3] |
Gao Mengdi, Huang Haihong, Li Xinyu, et al. A novel method to quickly acquire the energy efficiency for piston pumps[J]. Journal of Dynamic Systems Measurement & Control, 2016, 138(10):101004.
|
[4] |
Bergada J, Kumar S, Davies D, et al. A complete analysis of axial piston pump leakage and output flow ripples[J]. Applied Mathematical Modelling, 2012, 36(4):1731-1751.
|
[5] |
Ivantysynova M, Lasaar R. An investigation into microand macrogeometric design of piston/cylinder assembly of swash plate machines[J]. International Journal of Fluid Power, 2004, 5(1):23-36.
|
[6] |
Shi X, Manring N D. A torque efficiency model for an axial piston swash plate type hydrostatic pump[C]//Proceedings of the Bath workshop on power transmission and motion control, Bath, UK, 12-14, September, 2001.
|
[7] |
Shang Lizhi, Ivantysynova M. Port and case flow temperature prediction for axial piston machines[J]. International Journal of Fluid Power, 2015, 16(1):35-51.
|
[8] |
Jang D S. Verlustanalyse an Axialkolbeneinheiten[D]. Aachen, Germany:RWTH Aachen University, 1997.
|
[9] |
Ivantysyn J, Ivantysynova M. Hydrostatic pumps and motors:principles, design, performance, modelling, analysis, control and testing[M]. New Delhi:TechBooks International, 2003.
|
[10] |
Rahmfeld R, Marsch S, Göllner W, et al. Efficiency potential of dry case operation for bent-axis motors[C]//8th international fluid power conference, Dresden, 2012.
|
[11] |
Xu Bin, Zhang Junhui, Li Ying, et al. Modeling and analysis of the churning losses characteristics of swash plate axial piston pump[C]//International Conference on Fluid Power and Mechatronics, 2015.
|
[12] |
Zhang Junhui, Li Ying, Xu Bin, et al. Experimental study on the influence of the rotating cylinder block and pistons on churning losses in axial piston pumps[J]. Energies, 2017, 10(5):662.
|
[13] |
Håkan O. Power losses in an axial piston pump used in industrial hydrostatic transmissions[C]//Proceedings of the Eighth Scandinavian International Conference on Fluid Power, Tampere, Finland, 7-9 May, 2003.
|
[14] |
Batchelor G K. An introduction to fluid dynamics[M]. London:Cambridge University Press, 2000.
|