Citation: | Simiao Yu, Shutao Zheng, Yu Yang, Zhiyong Qu, Junwei Han. Hardware-in-the-Loop Simulation System for Space Manipulator Docking: Model, Stability and Experimental Evaluation[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2020, 29(1): 89-102.doi:10.15918/j.jbit1004-0579.18134 |
[1] |
Zhang K F, Zhou H, Wen Q P, et al. Review of the development of robotic manipulator for international space station[J]. Chinese Journal of Space Science, 2010, 30(6):612-619.
|
[2] |
Zhang W H, Ye X P, Ji X M, et al. Development summarizing of space robot technology national and outside[J]. Flight Dynamics, 2013, 31(3):198-202.
|
[3] |
Feng F, Liu Y, Liu H, et al. Design schemes and comparison research of the end-effector of large space manipulator[J]. Chinese Journal of Mechanical Engineering, 2012, 25(4):674-687.
|
[4] |
Pan D, Wei C, Tian H, et al. Capturing dynamics and experiment of the space large end effector[J]. Journal of Astronautics, 2014, 35(10):1120-1126.
|
[5] |
Jie D, Ni F L, Tan Y, et al. Capture strategy based on a distributed control system for a large-scale space end-effector[J]. Robot, 2011, 33(4):434-439. (in Chinese)
|
[6] |
Yoneyama K, Shiraki K, Ono Y, et al. Japanese experiment module (JEM) program overview[C]//Space Programs and Technologies Conference. Reston, VA, USA:AIAA, 1992:1309.
|
[7] |
Ananthakrishnan S, Teders R, Alder K. Role of estimation in real-time contact dynamics enhancement of space station engineering facility[J]. IEEE Robotics & Automation Magazine, 1996, 3(3):20-28.
|
[8] |
Ma O, Flores-Abad A, Boge T. Use of industrial robots for hardware-in-the-loop simulation of satellite rendezvous and docking[J]. Acta Astronautica, 2012, 81(1):335-347.
|
[9] |
Grimbert D. Dynamic testing of a docking system[C]//Proc 1st European In-Orbit Operations Technology Symposium, 1987:281-288.
|
[10] |
Elfving A, Fehse W. Simulation tools for the development of an autonomous rendezvous and docking system[J]. ESA Journal, 1987, 11:197-214.
|
[11] |
Yang H, Xie Z, Sun K, et al. Development of ground experiment system for space end-effector capturing the floating target in 3-dimensional space[J]. Industrial Robot:An International Journal, 2015, 42(4):347-358.
|
[12] |
Yang H, Jin M, Xie Z, et al. Ground micro-gravity verification of free-floating non-cooperative satellite docking[C]//2015 IEEE International Conference on Advanced Intelligent Mechatronics. Piscataway, NJ, USA:IEEE Press, 2015:1253-1258.
|
[13] |
Qi C, Gao F, Zhao X, et al. Low-order model based divergence compensation for hardware-in-the-loop simulation of space discrete contact[J]. Journal of Intelligent & Robotic Systems, 2017, 86(1):81-93.
|
[14] |
Qi C, Gao F, Zhao X, et al. A force compensation approach toward divergence of hardware-in-the-loop contact simulation system for damped elastic contact[J]. IEEE Transactions on Industrial Electronics, 2017, 64(4):2933-2943.
|
[15] |
Zebenay M, Boge T, Krenn R, et al. Analytical and experimental stability investigation of a hardware-in-the-loop satellite docking simulator[J]. Proceedings of the Institution of Mechanical Engineers, Part G:Journal of Aerospace Engineering, 2015, 229(4):666-681.
|
[16] |
Chang T, Cong D, Ye Z, et al. Interface issues in hardware-in-the-loop simulation for spacecraft on-orbit docking[C]//IEEE International Conference on Control and Automation. Piscataway, NJ, USA:IEEE Press 2007:2584-2590.
|
[17] |
Zhao H, Zhang S. Stability research of space docking dynamics simulation based on Stewart platform[J]. Machine Tool & Hydraulics, 2006(8):1-7.
|
[18] |
Yan H, Han J, Tong Z, et al. Hybrid realtime simulation of the space docking process[C]//16th IEEE International Conference on Artificial Reality and Telexistence-Workshops. Piscataway, NJ, USA:IEEE Press, 2006:323-327.
|
[19] |
Huang Q T, Jiang H Z, Zhang S Y, et al. Spacecraft docking simulation using hardware-in-the-loop simulator with Stewart platform[J]. Chinese Journal of Mechanical Engineering, 2005, 18(3):415-418.
|
[20] |
Huang Q T, Han J W, He J F. Dynamics modeling of a six-degree- of-freedom parallel platform and its analysis.[J]. Mechanical Science and Technology, 2006(25):382-385.
|
[21] |
Zhang S Y, Zhao H, Han J W. Direct and reverse algorithms for real-time control of 6-DOF platform[J]. Machine Tool & Hydraulics, 2003(3):133-135.
|