Welcome to Journal of Beijing Institute of Technology
Volume 24Issue 2
.
Turn off MathJax
Article Contents
XI Jun-qiang, LU Jia, PAN Chun. Modeling and simulation of the static characteristics of diaphragm spring clutches[J]. JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2015, 24(2): 188-193. doi: 10.15918/j.jbit1004-0579.201524.0208
Citation: XI Jun-qiang, LU Jia, PAN Chun. Modeling and simulation of the static characteristics of diaphragm spring clutches[J].JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY, 2015, 24(2): 188-193.doi:10.15918/j.jbit1004-0579.201524.0208

Modeling and simulation of the static characteristics of diaphragm spring clutches

doi:10.15918/j.jbit1004-0579.201524.0208
  • Received Date:2013-08-20
  • The diaphragm spring clutch static characteristics to improve the starting quality for cars equipped with automated mechanical transmission (AMT) were modeled and simulated. First, axial stiffness of clutch cushion spring and characteristic curves of diaphragm spring were theoretically and experimentally studied. Then, model of transfer characteristics of the normal force was built, with special conscen on the abrasion of friction discs and the influence of temperature to diaphragm spring. Finally, the model was tested in practical starting for cars equipped with AMT, which showed that the starting quality was significantly improved. The experimental results showed that the proposed model was precise enough to be implemented conveniently.
  • loading
  • [1]
    Vasca F,Vasca F, Lannell L,et al.Torque transmissibility assessment for automotive dry-clutch engagement[J]. IEEE ASME Transactions on Mechatronics, 2011, 16(3): 564-573.
    [2]
    Lucente G,Montanari M, Rossi C. Modelling of an automated manual transmission system [J]. Mechatronics, 2007, 17(2-3): 73-91.
    [3]
    Glielmo L,Vasca F.Optimal control of dry clutch engagement[C]//SAE 2000 World Congress,Detroit,MI,United States, 2000.
    [4]
    Zhang Tai,Ge Anlin,Song Chuanxue,et al.The test and research of AMT start and shift of off-road vehicle[J]. Automotive Technology, 2006(4):27-30.(in Chinese)
    [5]
    Xiao Yongming,Sun Dongye,Qin Datong,et al.Research on patial fuzzy control of car clutch in starting phase[J]. Automotive Technology, 2008(12):12-15. (in Chinese)
    [6]
    Lu Jia, Liu Haiou, Peng Jianxin, et al. Research on hill-start control strategy for military heavy-duty wheeled vehicles with AMT[J].Ordnance Technology, 2013,34(8):929-934. (in Chinese)
    [7]
    National Development and Reform Commission. QC/T 27—2004, Car dry friction clutch assembly bench test method [S].Beijing: China Planning Press, 2004.(in Chinese)
    [8]
    Zhang Tieshan. Discuss on assumptions of the Almen-Laszlo equation for diaphragm spring[J].Proceedings of the Automobile Technology,2003(12):12-14.
    [9]
    Ren Tao,Wen Daohua, He Dazhi, et al. Finite element analysis of diaphragm spring[J]. Journal of Changchun University of Science and Technology, 2010,33(4):92-94. (in Chinese)
    [10]
    Lin Shiyu.The design and manufacture of the diaphragm spring clutch disc spring[M].Nanjing: Southeast University Press, 1995.(in Chinese)
    [11]
    Almen J O, Laszlo A.The uniform section disc spring[J].Transaction of the ASME,1936,58(10):305-314.
  • 加载中

Catalog

    通讯作者:陈斌, bchen63@163.com
    • 1.

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (900) PDF downloads(1843) Cited by()
    Proportional views
    Related

    /

      Return
      Return
        Baidu
        map