Feb. 2023

Article Contents

Article Navigation> Transactions of Beijing institute of Technology> 2023> 43(2): 143-150

YIN Yaobao, LIU Xiaoxue, LI Shuanglu, LI Wanye, LU Chang, XIAO Qiang. Thermodynamic Modeling and Analysis of Aviation Servo Actuator with Return Oil Cooling Structure[J]. Transactions of Beijing institute of Technology, 2023, 43(2): 143-150. doi: 10.15918/j.tbit1001-0645.2022.045

Citation:

YIN Yaobao, LIU Xiaoxue, LI Shuanglu, LI Wanye, LU Chang, XIAO Qiang. Thermodynamic Modeling and Analysis of Aviation Servo Actuator with Return Oil Cooling Structure[J].Transactions of Beijing institute of Technology, 2023, 43(2): 143-150.doi:10.15918/j.tbit1001-0645.2022.045

Citation:

YIN Yaobao, LIU Xiaoxue, LI Shuanglu, LI Wanye, LU Chang, XIAO Qiang. Thermodynamic Modeling and Analysis of Aviation Servo Actuator with Return Oil Cooling Structure[J].Transactions of Beijing institute of Technology, 2023, 43(2): 143-150.doi:10.15918/j.tbit1001-0645.2022.045

PDF( 1338 KB)

Thermodynamic Modeling and Analysis of Aviation Servo Actuator with Return Oil Cooling Structure

doi:10.15918/j.tbit1001-0645.2022.045

1.
School of Mechanical Engineering, Tongji University, Shanghai 201804, China
2.
Changchun Control Technology Co., Ltd., Aero Engine Corporation of China, Changchun, Jilin 130102, China

Received Date:2021-11-30

Abstract

Abstract

Aviation vector nozzle actuators are seriously affected by the heat radiation of the engine, thus, the oil return cooling method is often used to control the temperature of the actuator components. Considering the convection and radiation between the engine and the servo valve actuator, and the heat transfer process of each component of the actuator, a thermodynamic model of the vector nozzle actuator was established based on the lumped parameter method under real working conditions. The model was used to analyze and obtain the temperature distribution law and its influencing factors of each component of the actuator during the piston in neutral position and reciprocate. The analysis results show that when the piston is in near the neutral position, the oil flow passes the cooling channel, taking away heat through heat conduction, getting better cooling effect. When the piston reciprocates, the oil continuously enters and exits the rod cavity and the rodless cavity, and the temperature of each node can reach a stable fluctuation state and be lower than the thermal equilibrium temperature of the neutral position. The temperature of each node of the actuator increases with the increase of the radiation temperature, ambient temperature and oil temperature, among which the radiation temperature of the engine brake has the most obvious influence. The cylinder barrel is directly affected by the thermal radiation of the brake. When the temperature of the brake rises from 300 °C to 400 °C, the temperature of the cylinder barrel on the left and right sides can increase by about 40 °C. Through convective heat transfer, the temperature of each node of the actuator can increase linearly with the increase of ambient temperature and oil temperature.
- servo actuator,
- lumped parameter method,
- oil return cooling,
- thermodynamic modeling

FullText(HTML)

References (13)

References

[1]	蔡显新, 齐思鑫, 吴春来, 等. 航空发动机静强度设计中的保护准则探讨[J]. 机械工程学报, 2017, 53(13): 101 − 107. doi:10.3901/JME.2017.13.101 CAI Xianxin, QI Sixin, WU Chunlai, et al. Investigation on the protect criteria of aero-engine static strength design[J]. Journal of Mechanical Engineering, 2017, 53(13): 101 − 107. (in Chinese) doi:10.3901/JME.2017.13.101
[2]	吴帅, 庞博, 位仁磊, 等. 飞机制动半实物仿真系统[J]. bob手机在线登陆学报, 2020, 40(2): 189 − 192+197. WU Shuai, PANG Bo, WEI Renlei, et al. A hardware-in-the-loop simulation for aircarft braking[J]. Transactions of Beijing Institute of Technology, 2020, 40(2): 189 − 192+197.
[3]	GHOBBAR A A, CATOR E, MAYORDOMO A F. A decision support tool for strategic engine maintenance planning and life limited parts[M]. London: Springer, 2013: 449 − 461.
[4]	高嵩, 国岩, 李新飞, 等. 动力定位船矢量推进器回转动力学响应分析[J]. bob手机在线登陆学报, 2020, 40(11): 1182 − 1189. GAO Song, GUO Yan, LI Xinfei, et al. Dynamic response characteristics of hydraulic rotary system for azimuth thruster of dynamic positioning ship[J]. Transactions of Beijing Institute of Technology, 2020, 40(11): 1182 − 1189. (in Chinese)
[5]	ZHANG Binglong, LIU He, DONG Iinzhong. Research on nozzle jet vector control with synthetic jet technology[J]. International Journal of Turbo & Jet-engines, 2019, 37(1): 79 − 83.
[6]	RAMEZANI Mohammad Ali, YOUSEFI Shahram, FOULADI Noorbakhsh. An experimental and numerical investigation of the effect of geometric parameters on the flexible joint nonlinear behavior for thrust vector control[J]. Proceedings of the Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering, 2019, 233(8): 2772 − 2782. doi:10.1177/0954410018785988
[7]	刘友宏, 丁玉林, 罗一夫. 航空发动机矢量喷管作动器伺服阀非稳态热分析[J]. 南京航空航天大学学报, 2017, 49(3): 313 − 319. LIU Youhong, DING Yulin, LUO Yifu. Transient heat transfer analysis for servo valve of aero engine vectoring nozzle[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2017, 49(3): 313 − 319. (in Chinese)
[8]	王岩, 郭生荣, 杨乐. 电动静液作动器热力学建模方法及油液温升规律[J]. 北京航空航天大学学报, 2018, 44(8): 1596 − 1602. WANG Yan, GUO Shengrong, YANG Le. A thermodynamic modeling method of electro-hydrostatic actuator and law of oil temperature rise[J]. Journal of Beijing University of Aeronautics and Astronautics, 2018, 44(8): 1596 − 1602. (in Chinese)
[9]	丁玉林, 刘友宏, 牛俊杰. 航空发动机矢量喷管作动器电磁阀通油不冷却工况热分析[J]. 科学技术与工程, 2018, 18(22): 302 − 307. doi:10.3969/j.issn.1671-1815.2018.22.044 DING Yulin, LIU Youhong, NIU Junjie. Heat analysis of solenoid valve of aeroengine thrust vector control actuator while cooling system is out of work[J]. Science Technology and Engineering, 2018, 18(22): 302 − 307. (in Chinese) doi:10.3969/j.issn.1671-1815.2018.22.044
[10]	任延飞, 席军强, 陈慧岩, 等. 基于混合建模方法的车用比例电磁阀热效应影响分析[J]. bob手机在线登陆学报, 2022, 42(3): 251 − 260. doi:10.15918/j.tbit1001-0645.2021.057 REN Yanfei, XI Junqiang, CHEN Huiyan, et al. Analysis of thermal effect on proportional solenoid valve used in vehicles based on hybrid modeling[J]. Transactions of Beijing Institute of Technology, 2022, 42(3): 251 − 260. (in Chinese) doi:10.15918/j.tbit1001-0645.2021.057
[11]	ANDO Etuo. Fluid cylinder with cooling passages: U. S. Patent 5, 331, 884 [P]. 1994-07-26.
[12]	CHANG Zhengze. Heat transfer experimental investigation for piston rod sensor in hydraulic servo actuator of hypersonic combustion ramjet engine vectoring nozzle[C]//Proceedings of 21st AIAA International Space Planes and Hypersonics Technologies Conference, [S. l.]: AIAA International Space Planes and Hypersonics Technologies Conference, 2017, DOI: 10.2514/6.2017-2128
[13]	陶文铨. 传热学[M]. 北京: 高等教育出版社, 2006. TAO Wenquan. Heat Transfer Theory[M]. Beijing: Higher Education Press, 2006. (in Chinese)